LONG CHANG MACHINERY CO., LTD.

Specification	MCV850		MCV1100
Spindle
Type of tool shank	ISO40 (BT / CAT / DIN 69871A)	ISO50 (BT / CAT / DIN 69871A)	ISO40 (BT / CAT / DIN 69871A)	ISO50 (BT / CAT / DIN 69871A)
Max. spindle speed	8,000 rpm / 10,000 rpm (Op)	6,000 rpm / 8,000 rpm (Op)	8,000 rpm / 10,000 rpm (Op)	6,000 rpm / 8,000 rpm (Op)
Spindle motor	7.5/11 kW / 11/15kW (Op)	15/18.5 kW / 22 /26kW (Op)	7.5/11 kW / 11/15kW (Op)	15/18.5 kW / 22/26kW (Op)
Type of transmission	Belt
Table
Table size	1,050 X 600 mm ( 41.3 X 23.6 " )		1300 X 600 mm (51.1X23.6")
Floor to table	855 mm(33.6")
Max. table loading capacity	1,000 kgs(2,200Lbs)
T-slot (number x width x pitch)	6 X 18 mm X 100 mm (6 X 0.7" X 3.9")
Spindle center to column	652 mm (25.6")
Travel
X-Axis	850 mm (33.5")		1,100 mm (43.3")
Y-Axis	600 mm (23.6")
Z-Axis	560 mm (22.0")
Spindle nose to table	100 ~ 660 mm (3.9 ~ 25.9")
Feed system
Rapid traverse speed	X/Y: 20 M/min(787.4"/min) , Z:15 M/min(590.6/min)
Feed motor (FANUC)	X: 1.8kW (12 Nm) , Y: 3.0kW (22 Nm) , Z:4.2kW (30 Nm)
Ball screw diameter & pitch	X : 40mm, Y/Z :45mm / 10mm(0.39")
Cutting feed rate	1~10,000 mm/min(0.04 ~ 393.7"/min)
Type of transmission	Direct Drive
ATC
Tool storage capacity	20T / 24 or 32 or 40T(Op)	24T / 30T (Op)	20T / 24 or 32 or 40T(Op)	24T / 30T (Op)
ATC type	Armless/ Arm type (Op)	Arm type	Armless/ Arm type (Op)	Arm type
Max. tool diameter	100 / 95 / 76 / 76 mm ( 3.9 / 3.7 / 3 / 3" )	110 / 127 mm ( 4.3 / 5" )	100 / 95 / 76 / 76 mm ( 3.9 / 3.7 / 3 / 3" )	110 / 127 mm ( 4.3 / 5" )
Without adjacent tool	180 / 185 / 127 / 127 mm ( 7.1 / 7.3 / 5 / 5" )	200 / 228 mm ( 7.9 / 9" )	180 / 185 / 127 / 127 mm ( 7.1 / 7.3 / 5 / 5" )	200 / 228 mm ( 7.9 / 9" )
Max. tool length	300mm(11.8")	350 mm(13.8" )	300mm(11.8")	350 mm(13.8" )
Max. tool weight	7 kg(15 Lbs)	15 kgs(33Lbs)	7 kg(15 Lbs)	15 kgs(33Lbs)
Tool changing time (Tool to Tool)	1.7 / 1.5 / 1.5 / 1.5 sec	2.5 sec	1.7 / 1.5 / 1.5 / 1.5 sec	2.5 sec
Tool changing time (Chip to Chip)	11 sec / 5.5 sec	7 sec	11 sec / 5.5 sec	7 sec
Method of tool selection	Random selection
Method of tool selection	bi-directional magazine rotation
Tool display	Yes
Special tool management	Yes
Coolant system
Coolant tank size	486 L
Coolant capacity	105 L / min
Chip Flush capacity	105 L / min
Machine size
Machine height	2,600 mm(102.3")	2,900 mm(114.7")	2,600 mm(102.3")	2,900 mm(114.7")
Floor space	2,540 X 2,190 mm(100X86.2")		2,920 X2,190 mm(115X86.2")
weight	7,200 kgs(15840Lbs)	7,500 kgs(16500Lbs)	7,400 kgs(16280Lbs)	7,700 kgs(16940Lbs)
Power source
Electrical power supply	25 KVA / 3PH,220V 50/60HZ
Compressed air supply	6.0 kgf/c㎡ (85PSI) (0.6MPa)
Controller
	FANUC / HEIDENHAIN / SIEMENS

* Specifications may different according to opiton accessories and are subject to change without notice.

Standard accessories	Optional accessories
Armless type ATC (20Tools)(ISO40)	Arm type ATC (24 or 32 or 40 tools)(ISO40)
Arm type ATC (24 tools)(ISO50)	Arm type ATC (30 tools)(ISO50)
Fully enclosed splash guard	High-speed Spindle 10000 rpm(ISO40)
Chip flush system	Bigger spindle motor 11/15kW, 15/18kW(ISO40)
Coolant system	Spindle chiller
Coolant tank & chip collector	Coolant through spindle system
Automatic lubrication system	Air blow system for dry cutting
Telescopic covers	Flat type chip conveyor
Portable electronic handwheel (FANUC)	4th or 4+5th axis rotary table
Working light	High precision linear scale
Alarm light	Working piece measurement system
Tool box	Tool length measurement system
Operator's manual and parts list	Heat exchanger on electrical cabinet
Leveling bolts, pads and nuts	Power transformer
	CE (Safety door interlock)